HS technology

E-Drill 2.0

E-drill 2. 0 - - hs-technik

E-Drill

New force-free electro-erosion cutting process (EDM) for maximum effectiveness and minimum component damage when removing fasteners. Reduce your disassembly times by 90 %!

E-Drill 2.0

E-Drill offers force-free electrical discharge machining (EDM) for repeatability and effectiveness on a scale that conventional twist drilling cannot. You can remove the head or collar of carbide fasteners
(titanium, steel and nickel alloys) in less than 10 seconds, compared to the usual five to seven minutes required by conventional twist drills. E-Drill 2.0 builds on this technology by combining both hand tools (CG and EG) into a single
hand tool that can run on 110 V and is easier to maintain - all in
a smaller and more robust form factor.

Your benefits:
Reduced AOG time
Reduced machining times
Reduced component damage rate
Reduced teach-in time
Minimization of FOD
Reduction of injuries
Elimination of contamination

Areas of application:

Removal of 3/32" to 7/16" diameter carbide fasteners
Head or collar side removal
Metal or composite skin
Airframe or engine applications
Removal of key-locked inserts and
captive nuts
Square drive rescue kit (broken bolt or
Removal of bolts}

E-drill 2. 0 - - hs-technik