Compressive force test & bending
Printing plates
- For compression tests on springs, foams, cartons, spray cans and many others.
Pressure plates for high loads
- These high-quality stainless steel printing plates are ideal for printing tests on springs, foams, cartons, spay cans and many other products. Integrated eye end.
3-point / 4-point bending device
- This group of bending fixtures is designed for 3-point and 4-point bending testing of plastics, metals, ceramics, pipes and many other materials. Base elements are available in two sizes with a bending fin and any roller diameter. Use a combination of base element and bending fin for the 3-point bend test or two base elements for the 4-point bend test. The base elements have sliding blocks with multiple V-grooves to allow the use of different roller diameters. Rollers with a diameter of 10 mm are included and other sizes are available. The base elements have engraved rulers with an inch scale on one side and a mm scale on the other. Integrated mounts with an eyelet at the end facilitate mounting on tension measuring devices, force gauges and test stands. The base units also include through holes and mounting screws for direct mounting to specific test stands.
Chuck / bit holder
- For securing round test pieces, holders or bits. The Mark-G1010-X is usually used for force measurements and is mounted on a force gauge or test stand. The G1022-X is usually mounted on a TST series torque tester for torque measurements.
Padded attachments
- For applications in the field of physiotherapy and ergonomics, including muscle strength tests, work/
workplace requirements, etc.
Finger simulator
- Finger pressure simulator with rubber tip for testing pushbuttons, membrane switches, touchscreens, keyboards, etc.
Device for point loading
- For determining the puncture resistance of plastic films and other materials up to 5kN in accordance with ASTM D5748. Four quick-release clamps and a compression ring with co-centric ribs effectively secure the material while the supplied piston with ball probe stretches and tears the sample.
Device for checking syringes
- Designed to check the compression force for syringes according to ISO 7886-1 and other relevant standards.
